System Includes: - Outdoor Condenser: UMAT42HP230V1AO
- Indoor Air Handler: UMAT42HP230V1AD
- Required for install, but not included: 3/8" x 5/8" line set
The Gree U-Match UMAT42HP230V1AD-S is an 39,500 BTU concealed Slim Duct ductless mini split heat pump system. It is an energy efficient 16 SEER system, and the slim duct design will add inconspicuous climate control to any room.Each unit can be operated by the included wired controller mounted to the wall. Just like a wall-mounted ductless split, the air handler is connected to the outdoor condenser via a line set.This type of system allows for incredible flexibility in terms of air distribution and the type of grille or diffuser that will compliment your rooms style. This system uses a
3/8" x 5/8" line set and has a maximum line run of 164'.
Features & Benefits: - High Efficiency G10 Inverter Engineering Technology
- 4-way discharge air
- Quiet operation sound pressure level at 56dB(A) (outdoor), down to 28dB(A) (indoor)
- Medium static pressure capability
- Power failure recovery
- Internal condensate drain pump
- Low ambient cooling (5 deg F)
- Eco-friendly R410A refrigerant
- Flexible return air from bottom or rear (as needed)
- Slim line construction just 7-7/8" high
- Sentry float switch in air handler
How many BTUs do I need for my ductless split?Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty.(BTU ratings are estimates only, based on 10ft ceilings, with great insulation and windows. Some factors may alter this calculation: lack of insulation, heavy sun, excessively hot regions, & tall ceilings)
9,000 BTU 250-350 sqft
12,000 BTU 350-500 sqft
18,000 BTU 500-750 sqft
24,000 BTU 750-1000 sqft
30,000 BTU 1000-1250 sqft
Make sure you install a unit that is going to properly cool your square footage. An over-sized air conditioner is actually less effective and wastes energy at the same time. Air conditioners remove both heat and humidity from the air. If the unit is too large, it will cool the room quickly, but only remove some of the humidity. This leaves the room with a damp, clammy feeling. A properly sized unit will remove humidity effectively as it cools.
Which line set kit do I need?This system uses a 3/8" x 5/8" line set. These are sold separately, and you can choose from various lengths of line: 15', 25', and 50'. The length needed depends on the needs of your project and how you will set up the system (distance from outdoor condenser to indoor air handler).
Is this backed by a warranty?Yes, it comes fully backed by a manufacturer's warranty. Please be aware that only systems that are installed by a licensed HVAC contractor are backed by the warranty. Proof of licensed installation is required. The receipt/invoice from the contractor should be sufficient.